Apple iPhone's geheime codes die ik in de loop van de tijd online gevonden heb. Sorry was te lui om het te vertalen.

 PAS OP! -- GEBRUIK GEHEEL OP EIGEN RISICO! 

3001#12345# and tap Call. Enter field mode.
Field mode reveals many of the inner settings of your iphone specially up-to-date network and cell information.

*#06# Displays IMEI. No need to tap call.
IMEI is the unique identifier for your cell phone hardware together with your SIM information it identifies you to the provider network

*777# and tap Call. Account balance for prepaid iPhone.

*225# and tap Call. Bill Balance. Postpaid only.

*646# and tap Call. Check minutes. Postpaid only.

*#21# and tap call. Setting interrogation for call forwards.
Discover the settings for your call forwarding. You'll see whether you have voice, data, fax, sms, sync, async, packet access, and pad access call forwarding enabled or disabled.

*#30# and tap Call. Calling line presentation check.
This displays whether you have enabled or disabled the presentation of the calling line, presumably the number of the party placing the call.

*&76# and tap Call. Check whether the connected line presentation is enabled or not.

*#43# and tap Call. Determine if call waiting is enabled.
Displays call waiting status for voice, data, fax, sms, sync data, async data, packet access and pad access. Each item is either enabled or disabled.

*#61# and tap Call. Check the number for unanswered calls.
Show the number for voice call forwarding when a call is answered.
Also show the options for data, fax, sms, sync, async, packet access and pad access.

*#62# and tap Call. Check the number for call forwarding if no service is available.
Just like the previous, except for no-service rather than no-answer situations.

*#67# and tap Call. Check the number for call forwarding when the iPhone is busy.
And again, but for when the iPhone is busy.

*#30# Thus, you can check whether the caller identification (Clip-function) in the iPhone is active.

*#43# Call Waiting Status

*43# Activate a waiting
#43# Deactivate waiting

*#746025625# SIM Clock Stop Mode.
Whether your SIM card the SIM Clock Stop mode supported, you can find out with this code. The iPhone will then idle at the SIM card, ie no calls, etc., all activities on the SIM card. This has a positive effect on power consumption and prolongs battery life.

*3370# EFR mode
Enhanced Full Rate improves voice quality, but slightly reduced battery life.
#3370# ERF OFF mode

*4720# Half Rate (HFR) on Opposite of EFR.
#4720# Half Rate (HFR) off

*21# Call divert a
#21# Call divert from
**21* destination number # number programmed
###21 deletes the call transfer is complete.
*#21# Call Forwarding Overview

**61* destination number ** (Time 5 to 30 seconds) # divert after 5 to 30 seconds to ring
*61# Activate divert
#61# Call divert Disabled
##61# Deletes Diversion
*#61# Call divert status

**62* destination number # redirection in unattainability
*62# Turning On
#62# Off
##62# Clear
*#62# Status

**67* destination number # for Divert if busy
*67# Turning On
#67# Off
##67# Clear
*#67# Status

*31# phone number is transmitted (Caller ID)
#31# phone number is not transmitted (Caller ID)

*#5005*86# Are you the code, it displays the current mailbox settings.
*5005*86*# xxxxx Combox mail button on the available (xxxxx = mailbox number)

*646# minutes consumption control

*135# Display Own Phone Number

*33* blocking code # Outgoing calls to block the lock code to inquire about here please contact your network operator.
*#33 Unlock
*#33# Status

*331* blocking code # Outgoing calls abroad to block the lock code to inquire about her please contact your network operator.
#331* barring code # lift blockade
*#331# status

*#5005*7672# SMS-Center check
Current number of the SMS Center (SMSC) to find out. Each SMSC according to variable cost.
*5005*7672*xxxxxxx # SMS Center reactivate
(xxxxxxx = SMS center number)